CalculationTime

Scientific Calculator

Trigonometry, logs, powers and roots on one keypad, in degrees or radians.

How it works

Getting the functions right

Try it: sin 30 = 0.5 in degrees. log 1000 = 3. ln e = 1. 5! = 120. 2 xʸ 10 = 1,024.

The keypad starts in degrees, so sin 30 gives 0.5. Press Rad to work in radians, where sin(π ÷ 2) gives 1. Mixing them up is the commonest slip in trigonometry: sin 30 in radians is −0.988, a completely different angle.

log is the base-10 logarithm, the number of times you multiply 10 to get there: log 1000 = 3. ln is the natural log, base e: ln e = 1. The keys 10ˣ and eˣ undo them.

xʸ raises to any power, so 2 xʸ 10 is 1,024; x² and x³ square and cube. √, ∛x and ʸ√x take roots. A negative number has no real square root, so √(−4) shows Error. n! multiplies down to 1: 5! = 5 × 4 × 3 × 2 × 1 = 120.

EXP enters powers of ten: 6.02 EXP 23 is 6.02 × 10²³, and very large or tiny answers come back in the same e notation, such as 6.02e+23. Ans brings back your last answer so you can carry on from it, and M+, M− and MR keep a running total.

Questions

Questions about the Scientific Calculator

Is the calculator in degrees or radians?

It starts in degrees. Press Rad to switch to radians and Deg to switch back. sin 30 is 0.5 in degrees but −0.988 in radians.

What is the difference between log and ln?

log is base 10, so log 100 = 2. ln is base e (about 2.718), the natural log used for growth and decay: ln e = 1.

How do I enter a number like 6.02 × 10²³?

Type 6.02, press EXP, then 23. The display shows 6.02e23, and the answer comes back as 6.02e+23.

How do I raise a number to a power?

Type the number, press xʸ, then the power: 3 xʸ 4 gives 81. For squares and cubes use x² and x³.

Why does the square root of a negative number say Error?

Real numbers have no square root below zero. The answer would be an imaginary number, which this keypad does not work with.

What do Ans and RND do?

Ans puts your last answer back on the display so you can keep going. RND gives a random number between 0 and 1, handy for picking or simulations.

Good to know

Before you trust a result

Sources

Where the definitions come from